BENTLY 1900/65A-00-02-01-01-01監測器模塊
PROtop具有非常好的輸出過流動態范圍，能可靠觸發斷路開關和驅動大功率設備啟動和運行。在打葉復烤生產線上，PROtop提供穩定、持久和高效的直流電輸出。同時生產線還要求具有持續穩定的功率裕量、長使用壽命和對過壓、環境溫度或振動的低敏度，這些正是魏德米勒PROtop電源所擅長的。
BENTLY 1900/65A-00-02-01-01-01監測器模塊而創新的電子負載監控maxGUARD整合了以往需獨立安裝的等電位分配端子，形成24V DC電源分配系統，可節省高達50%的空間及20%的安裝時間。maxGUARD具有模塊化設計，在打葉復烤生產線上的優勢展現地淋漓盡致。它在各種模塊之間（饋電、負載監控和等電位分配端子）的橫聯件聯接模式，有效地減少了所需的布線時間。● 配備認證級直流保險絲的直流和交流寬范圍輸入：88-375Vdc, 85-264Vac
穩定的輸出：24-28Vdc, 10-9A, 240W
轉換效率高達93.5%，滿載功率損耗16.7W
允許工作在-25~70℃的寬溫度范圍下，60℃以下可持續滿載輸出
體積小(60 x 124 x 117mm，僅60mm導軌占用寬度)，重量輕(900g)
彈壓式接線端子方便安裝，不易松動.
圖3 普爾世直流/直流轉換隔離電源QS10.241-D1
普爾世實用基本型電源PIC120.241C
交流輸入范圍：180-264Vac
穩定的輸出：24-28Vdc, 5-4.3A, 120W
轉換效率90.5%，滿載功率損耗12.6W
高可靠的MTBF平均無故障時間：322萬小時 @ 24V/5A, 25℃
超長使用壽命：>15年 @ 24V/5A, 25℃
體積小(39 x 124 x 124mm，僅39mm導軌占用寬度)，重量輕(350g).
control station and remote i/o station of each subsystem; Ethernet layer, that is, Ethernet single network communication is adopted between PLC and upper computer. The digital and analog signals of each field device in the coke removal system are connected with the remote i/o station through the control cable to realize the input and output of the signal.
The hardware of the control system adopts ab1756 series products, which not only has high reliability, high stability, operability and functional integrity, but also has convenient scalability and maintainability, and can operate continuously and reliably in the industrial environment of electromagnetic interference and vibration. When the CPU or communication of the system fails, all output modules can be set to one of the three predefined states of off, hold and safety to ensure the safety of the process system and equipment. Its operation station adopts Dell commercial computer, equipped with 10/100mbit/s Ethernet card.
2 software composition of automatic control system
The system programming
