IC697PWR748D使用書,GE使用教程
VMIC產品的維護和保養。如果產品出現故障用戶應驗證以下內容：
a、 軟件b、 系統配置c、 電氣連接d、 跳線或配置選項e、 電路板完全插入其正確的連接器位置f、 接頭針腳清潔無污染g、 當插入或從VMEbus卡固定框架中卸下板h、 電纜和輸入/輸出連接的質量不建議進行用戶級維修。聯系VMIC退貨材料授權（RMA）編號。此RMA編號必須在任何退貨。6.2維護打印本手冊的附錄包含以下方面的圖紙和圖表：參考目的。
IC697PWR748D使用書6.3保修VMIC的標準產品保證不存在以下缺陷：材料和工藝有效期為自簽署之日起兩年（24個月）運輸在本保修的解除過程中，VMIC自行決定同意進行任何一項維修或在VMIC的工廠并由VMIC自行決定更換任何零件、組件，子組件附件或任何硬件、軟件或系統產品在正確和正常使用情況下，證明材料和工藝存在缺陷?？蛻魬谝粋€月內向VMIC發出此類缺陷的通知客戶發現此類缺陷后的合理時間。為了退回有缺陷的產品或零件，客戶必須聯系VMIC的客戶服務部門獲取電話號碼。缺陷產品或零件也必須正確裝箱和稱重。a之后已獲得VMIC呼叫票證號和RMA號，缺陷產品或零件可退回（表面不合格品的運輸費）VMIC。任何更換或維修的產品或零件將運回客戶的費用由VMIC（也包括UPS surface）承擔?？蛻魬撝溃鲜鲞^程有時可能貨物到達VMIC最多需要八（8）天?？蛻魮碛性谝韵虑闆r下，選擇由客戶自費裝運有缺陷的產品或零件：客戶無法承受這種可能的延遲。
This section of the technical manual provides information relative to the
care and maintenance of VMIC's products. Should the products malfunction, the
user should verify the following:
a. Software
b. System configuration
c. Electrical connections
d. Jumper or configuration options
e. Boards fully inserted into their proper connector location
f. Connector pins are clean and free from contamination
g. No components of adjacent boards are disturbed when inserting or
removing the board from the VMEbus card cage
h. Quality of cables and I/O connections
User level repairs are not recommended. Contact VMIC for a Return
Material Authorization (RMA) Number. This RMA Number must be obtained prior to
any return.
6.2 MAINTENANCE PRINTS
The appendix(ices) to this manual contain(s) drawings and diagrams for
reference purposes.
6.3 WARRANTY
VMIC's Standard Products are warranted to be free from defects in
material and workmanship for a period of two years (24 months) from the date of
shipment. In discharge of this warranty, VMIC, at its option, agrees to either repair
or replace, at VMIC's facility and at VMIC's discretion, any part, component,
subassembly accessory, or any hardware, software, or system product, which
under proper and normal use proves defective in material and workmanship.
The customer shall provide notice to VMIC of each such defect within a
reasonable time after the customer's discovery of such defect.
In order to return the defective product(s) or part(s), the customer must
contact VMIC's Customer Service Department to obtain a Call Ticket Number. The defective product(s) or part(s) must also be properly boxed and weighed. After a
VMIC Call Ticket Number and RMA Number have been obtained, the defective
product(s) or part(s) may be returned (transportation collect for surface UPS) to
VMIC. Any replaced or repaired product(s) or part(s) will be shipped back to the
customer's at the expense of VMIC (also UPS surface).
The customer should be aware that the above process can sometimes
take up to eight (8) days for the shipment to reach VMIC. The customer has the
option to ship the defective product(s) or part(s) at the customer's own expense if
the customer cannot afford this possible delay.
