WOODWARD 8280-423數字控制模塊 PDF資料
1.產 品 資 料 介 紹：
中文資料：
WOODWARD 8280-423 數字控制模塊 是一款廣泛應用于發動機控制、渦輪機控制、發電機組控制以及其他工業自動化系統中的數字控制模塊。它是Woodward公司生產的一部分，主要用于精確控制發動機、渦輪機以及其他機械設備的操作，確保其在預定工作條件下高效、穩定地運行。
主要特點和功能：
數字控制：
- 8280-423模塊提供精確的數字化控制，能夠處理各種輸入信號，進行實時控制，并根據預設的控制策略對輸出設備進行調整。它支持現代化的數字控制技術，具有高度的響應速度和控制精度。
多種輸入和輸出支持：
- 該模塊支持多種類型的輸入和輸出，如模擬輸入（4-20 mA、0-10 V）、開關量輸入、數字輸入等。對于輸出，通常支持數字信號、模擬信號（4-20 mA 或 0-10V），以及繼電器控制輸出等。模塊可以根據應用場景進行靈活配置。
高性能處理能力：
- 8280-423模塊擁有強大的處理能力，能夠實時處理大量的數據和信號，并基于控制算法調整輸出設備的運行參數。它非常適合需要高實時性和高精度控制的應用，如發電機組控制、風力發電控制和其他工業過程控制系統。
通信接口：
- Woodward 8280-423 數字控制模塊配備有多個工業通信接口，如 Modbus、Ethernet、CANopen 等標準協議，方便與其他設備（如PLC、HMI、SCADA 系統等）進行通信和數據交換。
自診斷功能：
- 模塊具有內建的自診斷功能，能夠實時監測自身的工作狀態，包括電源、電氣故障、信號異常等，并及時通過報警通知用戶。這使得系統的維護更加簡便，并能最大限度地減少因故障停機的時間。
高可靠性和抗干擾能力：
- 由于應用場合通常在工業環境中，Woodward 8280-423 控制模塊設計時具有較強的抗干擾能力，能夠在噪聲較大、溫度波動較大的環境中穩定工作。
靈活的參數配置和調節：
- 用戶可以通過HMI（人機界面）或計算機上的軟件工具來進行參數配置和調節，確保模塊能夠滿足特定應用的需求。它通常配備有易于操作的界面，使得安裝、配置和調試更加簡便。
應用領域：
發電機控制：
- 8280-423 廣泛應用于發電機組的控制系統中，能夠對發電機的運行進行精確控制，保證其穩定性和高效性。它能夠調節發電機的輸出電壓、頻率和功率等參數，并對負載變化作出實時反應。
發動機控制：
- 在發動機控制系統中，Woodward 8280-423 作為關鍵組件，能夠控制發動機的燃油噴射、點火時機、空氣燃料比等重要參數，確保發動機在不同工況下的最佳性能。
渦輪機控制：
- 對于燃氣渦輪機或蒸汽渦輪機，8280-423模塊能夠精確控制渦輪機的轉速、負載以及其他關鍵性能指標。它能夠根據輸入的傳感器數據進行實時調節，確保渦輪機的高效穩定運行。
風力發電：
- 在風力發電系統中，8280-423 控制模塊用于優化風力渦輪機的運行，調節葉片角度、風速監測等，最大限度地提高發電效率。
工業過程控制：
- 該模塊可應用于多個工業自動化領域，例如化工、石油、電力、礦山等，在過程控制中對設備運行狀態進行實時監測和調節。
船舶與海洋設備：
- 在船舶及海洋設備中，8280-423 用于控制主機、輔助發動機、泵、閥等設備，確保設備的高效運行和系統的安全穩定。
技術規格（典型）：
輸入類型：
- 模擬輸入（4-20 mA，0-10V等）
- 數字輸入（開關量信號）
- 編碼器輸入（用于轉速或位置監測）
輸出類型：
- 模擬輸出（4-20 mA 或 0-10 V）
- 繼電器輸出（用于啟停控制）
- 數字輸出（用于控制信號）
通信協議：
- Modbus RTU, Modbus TCP/IP, CANopen, Ethernet/IP 等常見工業協議
電源要求：
- 通常為24V DC（具體依應用而定）
工作溫度范圍：
- -40°C 到 +70°C，適應廣泛的工業環境
尺寸與安裝：
- 緊湊設計，通常支持DIN導軌安裝，便于在控制柜中集成
診斷與報警功能：
- 內建自診斷與故障報警功能，確保設備運行時的監控與維護
英文資料：
WOODWARD 8280-423 digital control module is a widely used digital control module in engine control, turbine control, generator set control, and other industrial automation systems. It is a part of Woodward's production, mainly used for precise control of the operation of engines, turbines, and other mechanical equipment, ensuring their efficient and stable operation under predetermined working conditions.
Main features and functions:
Digital control:
The 8280-423 module provides precise digital control, capable of processing various input signals, performing real-time control, and adjusting output devices according to preset control strategies. It supports modern digital control technology, with high response speed and control accuracy.
Multiple input and output support:
This module supports multiple types of inputs and outputs, such as analog inputs (4-20 mA, 0-10 V), switch inputs, digital inputs, etc. For output, it usually supports digital signals, analog signals (4-20 mA or 0-10V), and relay controlled outputs. Modules can be flexibly configured according to application scenarios.
High performance processing capability:
The 8280-423 module has powerful processing capabilities, capable of real-time processing of large amounts of data and signals, and adjusting the operating parameters of output devices based on control algorithms. It is very suitable for applications that require high real-time and high-precision control, such as generator control, wind power control, and other industrial process control systems.
Communication interface:
The Woodward 8280-423 digital control module is equipped with multiple industrial communication interfaces, such as Modbus, Ethernet, CANopen and other standard protocols, to facilitate communication and data exchange with other devices (such as PLC, HMI, SCADA systems, etc.).
Self diagnostic function:
The module has built-in self diagnostic function, which can monitor its own working status in real time, including power supply, electrical faults, signal abnormalities, etc., and notify users in a timely manner through alarms. This makes system maintenance easier and minimizes downtime due to malfunctions.
High reliability and anti-interference ability:
Due to its typical application in industrial environments, the Woodward 8280-423 control module is designed with strong anti-interference capabilities and can operate stably in environments with high noise and temperature fluctuations.
Flexible parameter configuration and adjustment:
Users can configure and adjust parameters through HMI (Human Machine Interface) or software tools on the computer to ensure that the module meets the specific application requirements. It is usually equipped with an easy-to-use interface, making installation, configuration, and debugging easier.
Application areas:
Generator control:
8280-423 is widely used in the control system of generator sets, which can accurately control the operation of the generator, ensuring its stability and efficiency. It can adjust the output voltage, frequency, power and other parameters of the generator, and make real-time responses to load changes.
Engine control:
In the engine control system, Woodward 8280-423 serves as a key component that can control important parameters such as fuel injection, ignition timing, and air-fuel ratio to ensure optimal performance of the engine under different operating conditions.
Turbine control:
For gas or steam turbines, the 8280-423 module can precisely control the speed, load, and other key performance indicators of the turbine. It can make real-time adjustments based on input sensor data to ensure efficient and stable operation of the turbine.
Wind power generation:
In wind power generation systems, the 8280-423 control module is used to optimize the operation of wind turbines, adjust blade angles, wind speed monitoring, etc., and maximize power generation efficiency.
Industrial process control:
This module can be applied to multiple industrial automation fields, such as chemical, petroleum, power, mining, etc., to monitor and adjust the real-time operation status of equipment in process control.
Ships and marine equipment:
In ships and marine equipment, 8280-423 is used to control main engines, auxiliary engines, pumps, valves, and other equipment to ensure efficient operation of the equipment and safe and stable systems.
Technical specifications (typical):
Input type:
Analog input (4-20 mA, 0-10V, etc.)
Digital input (switch signal)
Encoder input (for speed or position monitoring)
Output type:
Analog output (4-20 mA or 0-10 V)
Relay output (for start stop control)
Digital output (for control signals)
Communication protocol:
Common industrial protocols such as Modbus RTU, Modbus TCP/IP, CANopen, Ethernet/IP, etc
Power requirements:
Usually 24V DC (depending on the application)
Working temperature range:
-40 ° C to+70 ° C, suitable for a wide range of industrial environments
Size and Installation:
Compact design, typically supporting DIN rail installation for easy integration in control cabinets
Diagnostic and alarm functions:
Built in self diagnosis and fault alarm functions ensure monitoring and maintenance of equipment during operation
2.產 品 展 示
3.其他產品
4.其他英文產品
AMAT 0190-11415 Digital Input Module
GE D20 EME 10BASE-T Digital Control Modu
3BHE009681R0101 GVC750BE101 thyristor hi
5.更多庫存型號
| PFRL101A |  6SC6108-0SG02 | MC-TAIH62 |
| PFEL113 | 6SC6000-0NA02 | MC-PDOY22 80363975-150 |
| PFEL111 | 6SC6140-0FE01 | MC-PD1X02 |
| PFEA113 | 6SC6500-0UC01 | MC-TAIL02 |
| PFEA112 | 6SC6100-0GA00 | MC-TAIL12 |
| PFEA111 | 6SC6120-0FE00 | MC-TAIH02 |
| PFEA101 | 6SC6101-2B-Z | MC-TDODI3 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.jiangxidcs.
