Nikon 4S782-443溫度控制器 PDF資料
1.產 品 資 料 介 紹：
中文資料：
Nikon 4S782-443 溫度控制器是一種用于工業和科學應用的高精度溫度控制設備。它主要用于監測和調節設備或系統的溫度，以確保穩定的工作環境和產品質量。該溫度控制器廣泛應用于制造、實驗室、半導體生產等領域，具有多種功能和特性。
Nikon 4S782-443 溫度控制器的主要功能：
高精度溫度測量：
- 該控制器能夠實時監測環境溫度，提供高精度的溫度測量，通常精度可達到±0.1°C或更高。
- 支持多種溫度傳感器（如熱電偶、RTD等），使其適用于不同的測量需求。
溫度調節與控制：
- 具有PID（比例-積分-微分）控制算法，能夠精確調節加熱或冷卻設備，以達到所需的溫度設定值。
- 支持多種控制模式（如開關控制、模擬輸出控制等），根據應用需求靈活選擇。
實時數據顯示：
- 配備高清顯示屏，實時顯示當前溫度、設定溫度、工作狀態等信息，方便用戶觀察和調整。
- 一些型號可能還支持圖形界面，提供更直觀的操作體驗。
報警與安全功能：
- 可設置溫度上下限，當溫度超出設定范圍時，系統會自動發出報警信號，提醒操作人員注意。
- 具備故障保護功能，例如過溫保護、傳感器故障報警等，確保系統安全運行。
數據記錄與通訊功能：
- 支持數據記錄功能，能夠存儲歷史溫度數據，便于后續分析和審計。
- 通過標準通訊接口（如RS-232、RS-485、以太網等）與其他設備或監控系統連接，實現遠程監控與管理。
靈活的安裝與配置：
- 設計為模塊化，便于與其他設備集成，安裝和維護簡單。
- 提供用戶友好的界面，便于用戶設置和調整參數。
英文資料：
The Nikon 4S782-443 temperature controller is a high-precision temperature control device used for industrial and scientific applications. It is mainly used to monitor and regulate the temperature of equipment or systems to ensure a stable working environment and product quality. This temperature controller is widely used in manufacturing, laboratory, semiconductor production and other fields, with multiple functions and characteristics.
The main functions of Nikon 4S782-443 temperature controller are:
High precision temperature measurement:
This controller is capable of real-time monitoring of environmental temperature and providing high-precision temperature measurements, typically with an accuracy of ± 0.1 ° C or higher.
Support multiple temperature sensors (such as thermocouples, RTDs, etc.) to meet different measurement needs.
Temperature regulation and control:
Equipped with PID (Proportional Integral Derivative) control algorithm, it can accurately adjust heating or cooling equipment to achieve the desired temperature setting.
Support multiple control modes (such as switch control, analog output control, etc.), and flexibly choose according to application requirements.
Real time data display:
Equipped with high-definition display screen, real-time display of current temperature, set temperature, working status and other information, convenient for users to observe and adjust.
Some models may also support graphical interfaces, providing a more intuitive operating experience.
Alarm and safety functions:
Temperature upper and lower limits can be set. When the temperature exceeds the set range, the system will automatically send an alarm signal to remind the operator to pay attention.
Equipped with fault protection functions, such as over temperature protection, sensor fault alarm, etc., to ensure the safe operation of the system.
Data recording and communication function:
Support data recording function, capable of storing historical temperature data for subsequent analysis and auditing.
Connect to other devices or monitoring systems through standard communication interfaces such as RS-232, RS-485, Ethernet, etc., to achieve remote monitoring and management.
Flexible installation and configuration:
Designed to be modular, easy to integrate with other devices, and easy to install and maintain.
Provide a user-friendly interface for users to easily set and adjust parameters.
2.產 品 展 示
3.其他產品
4.其他英文產品
REF615E-E HBFEAEAGABCCANC11E Measurement
KOLLMORGEN S70602-NANANA servo/driver
5.更多庫存型號
| S32GNNA-HGNM-00 | SC322A-001 | S21HNNA-RNNE-00 |
| S32GNAA-RNVE-00 | SC323A-001 | SC104-001-T3 |
| S32GMNA-RNNM-00 | SC402-010 | SC105010I3 |
| S31HSNA-RNNM-03 | SC403-002-T3 | SC104-001-M |
| S31HNNA-RNNM-00 | SC322A-601-01 | SC105-001-M |
| S31HMAA-RNEE-00 | SC402-001-T3 | SC103-010-T4 |
| S31ANNH-RNNM-00 | SC102-010-T4 | S21GSAA-RNNM-02 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
