TRICONEX 3720卡件數字量,TRICONEX 3720配置教程
PACSystems RX7i控制器：固件版本5.50或更高版本。
7.要在任何GMR系統中使用增強診斷模式，版本需要4.05的GMR系統軟件。
不要在以下情況下啟用Genius NIU的增強診斷模式：使用GMR系統軟件版本的GMR系統的一部分4.04或更早。
8.在任何GMR系統中使用GMR CPU冗余模式，需要4.05版本的GMR系統軟件。
TRICONEX 3720卡件數字量不設置
Genius NIU上GMR的CPU冗余參數，即使用GMR系統軟件版本4.04的系統的一部分或更早。
9.VersaMax模擬輸入模塊IC200ALG240、IC200ALG620和安裝在Genius輸入/輸出站的IC200ALG630必須升級到固件版本1.20或更高版本。以前版本的模擬輸入模塊固件可能會導致輸入/輸出模塊意外丟失與任何Genius NIU固件版本一起使用時出現故障。看見
有關更多信息，請參閱“3.20版解決的問題”。正在升級? IC200GBI001-HL取代IC200GBI001-GK和以前的硬件和固件的版本。
? 硬件版本IC200GBI001 Gx和更高版本的硬件可以在現場升級到固件版本3.20，并用于安全認證應用。
? 版本3.20固件可以下載到任何硬件天才牛的改版。但是，-Fx和早期硬件版本不包括外部窗口看門狗計時器環行因此，Fx和更早版本未經認證可用于GMR系統的安全相關部分。
? 對于需要更新GNIU固件的用戶，提供了一個固件升級工具包
升級需要PC到NIU串行電纜IC200CBL002。
PACSystems RX7i controllers: Firmware version 5.50 or higher.
7. To use Enhanced Diagnostics mode in any GMR System, version
4.05 of the GMR System Software is required.
Do not enable Enhanced Diagnostics Mode on a Genius NIU that is
part of a GMR system that is using GMR System Software version
4.04 or earlier.
8. To use the GMR CPU Redundancy mode in any GMR system,
version 4.05 of the GMR System Software is required. Do not set
the CPU Redundancy parameter to GMR on a Genius NIU that is
part of a system that is using GMR System Software version 4.04
or earlier.
9. VersaMax analog input modules IC200ALG240, IC200ALG620 and
IC200ALG630 installed in Genius I/O stations must be upgraded to
firmware version 1.20 or later. Previous versions of analog input
module firmware may produce unexpected Loss of I/O Module
faults when used with any Genius NIU firmware version. See
“Problems Resolved for Release 3.20” for more information.Upgrading
? The IC200GBI001-HL replaces IC200GBI001-GK and previous
versions of the hardware and firmware.
? Hardware version IC200GBI001-Gx and later hardware versions
can be upgraded in the field to firmware revision 3.20 and used in
safety-certified applications.
? Version 3.20 firmware may be downloaded to any hardware
revision of the Genius NIU. However, -Fx and earlier hardware
versions do not include the external windowed watchdog timer
circuit. Thus, versions Fx and earlier are not certified for use in the
safety-relevant portion of a GMR system.
? For users who want newer GNIU firmware, a firmware upgrade kit
is available for download at http://gefanuc.com/support. Firmware
upgrades require a PC to NIU serial cable, IC200CBL002.
