12P4711X052輸入特性模件,12P4711X052使用方法
環境的電磁/無線電頻率干擾此時值不可用。保持柜門關閉。不使用通信設備距離機柜2米以內。環境溫度0°至70°C（32°至158°F）氣壓海平面達到3公里（1.86英里）
濕度5%-90%相對濕度高達55°C（131°F）非冷凝55°C（131°F）以上非冷凝的5%-40%相對濕度空氣質量無腐蝕性安裝占用INFI 90模塊安裝單元中的一個插槽浪涌保護符合IEEE-472-1974浪涌耐受能力測試
12P4711X052輸入特性模件認證CSA認證正在等待用作正常（非危險）位置的過程控制設備本節解釋IMHSS03液壓系統的操作伺服模塊。概述了液壓伺服系統（HSS）
過程控制系統內的模塊和相關模塊并解釋了關鍵模塊電路的操作。控制回路操作
HSS模塊、頻率計數器（FCS）模塊和多功能處理器（MFP）模塊構成控制閉環控制系統的一部分。MFP模塊
指導控制過程。HSS和FCS模塊相互面向MFP模塊。圖2-1顯示了渦輪機速度控制回路和控制信號的直徑圖往返于過程。
Environmental
Electromagnetic/radio
frequency interference
Values not available at this time. Keep cabinet doors closed. Do not use
communication equipment any closer than 2 meters from the cabinet.
Ambient temperature 0° to 70°C (32° to 158°F)
Atmospheric pressure Sea level to 3 km (1.86 mi)
Humidity 5% to 90% relative humidity up to 55°C (131°F) noncondensing
5% to 40% relative humidity above 55°C (131°F) noncondensing
Air quality Noncorrosive
Mounting Occupies one slot in an INFI 90 module mounting unit
Surge protection Meets IEEE-472-1974 surge withstand capability test
Certification CSA certification pending for use as process control equipment in an ordinary (nonhazardous) locationThis section explains the operation of the IMHSS03 Hydraulic
Servo Module. It gives an overview of the hydraulic servo (HSS)
module and related modules within a process control system
and explains the operation of key module circuitry.
CONTROL LOOP OPERATION
The HSS module, frequency counter (FCS) module and
multi-function processor (MFP) module form the controlling
segment of a closed loop control system. The MFP module
directs the control process. The HSS and FCS modules interface the process to the MFP module. Figure 2-1 shows a diagram of the turbine speed control loop and the control signals
to and from the process.
