EMBEDDED EPCDFBA#219 B2驅動模塊,EPCDFBA#219 B2使用進展
帶安全柵端子的輸入/輸出接線板
帶隔離柵端子（目錄號IC670CHS001和101）的輸入/輸出接線板有37個EPCDFBA#219 B2
終端。每個端子可容納一條或兩根AWG#14（平均2.1mm2）以下的電線交叉
帶箱式端子的輸入/輸出接線板
帶箱式端子（目錄號IC670CHS002和102）的接線板有51個端子，
每個可容納一個AWG#14（平均2.1mm2
橫截面）至AWG#22線（平均
0.36mm2
橫截面），或兩根AWG#18（平均0.86mm2）以下的電線
橫截面）。絕緣的
外部5mm（0.2in）跳線（如Altech#8879）可用于連接相鄰點。什么時候
使用外部跳線，導線容量從AWG#14（2.10mm2）減小
)至AWG#16
EMBEDDED EPCDFBA#219 B2驅動模塊
（1.32mm2
).
線路板連接器
帶連接器的輸入/輸出接線板（目錄號IC670CHS003和103）有兩個20針
輸入/輸出接線的公接頭。配對接頭為Amp零件號178289-8。這個
為防止錯誤插入，對接頭進行了鍵控。AMP D-3000系列中的任何鍍錫觸點
可與連接器一起使用（Amp零件號1-175217-5用于高接觸力插座
20-24量規（0.20-0.56mm2
)電線），1-175218-5用于16-20儀表的高接觸力插座
（0.56-1.42mm2）
). GE提供包含兩個匹配接頭外殼和觸點的套件
Fanuc零件號IC670ACC003。該套件包含16-20規格導線的銷。壓接工具是
此套件中未提供。
I/O Terminal Block with Barrier Terminals
The I/O Terminal Block with barrier terminals (catalog number IC670CHS001 and 101) has 37
terminals. Each terminal can accommodate one or two wires up to AWG #14 (avg 2.1mm
2
cross
section).
I/O Terminal Block with Box Terminals
The Terminal Block with box terminals (catalog number IC670CHS002 and 102) has 51 terminals,
each of which accommodates one AWG #14 (avg 2.1mm
2
cross section) to AWG #22 wire (avg
0.36mm
2
cross section), or two wires up to AWG #18 (avg. 0.86mm
2
cross section). An insulated
external 5mm (0.2in) jumper such as Altech #8879 can be used to connect adjacent points. When
an external jumper is used, the wire capacity is reduced from AWG #14 (2.10mm
2
) to AWG #16
(1.32mm
2
).
Wire to Board Connectors
The I/O Terminal Block with Connectors (catalog number IC670CHS003 and 103) has two 20-pin
male connectors for I/O wiring. The mating connector is Amp part number 178289-8. The
connectors are keyed to prevent wrong insertion. Any tin-plated contact in the AMP D-3000 series
can be used with the connector (Amp part number 1-175217-5 for high contact force receptacle for
20-24 gauge (0.20-0.56mm
2
) wires), 1-175218-5 for high contact force receptacle for 16-20 gauge
(0.56-1.42mm
2)
). A kit containing two mating connector housings and contacts is available as GE
Fanuc part number IC670ACC003. The kit contains pins for 16-20 gauge wire. A crimping tool is
not provided in this kit.
